Deep recycling industries specialize in manufacturing and exporting a variety of Brass components, as per client's requirement. The products ranges of Brass Fasteners are from Brass Anchors, Brass Nuts, Brass Washers, Brass Molding Inserts

Deep recycling industries specialize in manufacturing and exporting a variety of Brass components, as per client's requirement. The products ranges of Brass Fasteners are from Brass Anchors, Brass Nuts, Brass Washers, Brass Molding Inserts, Brass Wood Screws, Brass Neutral Links to Energy Meter Terminals, Energy Meter Screws. The list doesn't end here. There is more, such as Toggle Switch Parts, Brass Nipples, Brass Faucets, Brass Adapters. We manufacture the above mentioned products for various industries like Electronic & Electrical, Sanitary ware Applications, Wood Working Tools, Automobile Industry, etc.

www.deepri.com
www.dri.co.in
www.brasssanitary.com

These Brass Neutrals are installed in various types of Distribution Boards, Panel Boards, Switch Gears and Electrical Switch Boards

We manufacture Brass Neutrals in various sizes & dimensions like:
	Brass Neutral 12 Holes
	Brass Neutral 17 Holes
	Brass Neutral 19 Holes
	Brass Neutral 25 Holes
	Brass Neutral 30 Holes
	Brass Neutral 35 Holes
	Brass Neutral 40 Holes and many more..
These Brass Neutrals are installed in various types of Distribution Boards, Panel Boards, Switch Gears and Electrical Switch Boards
	Size: Shall be manufacture only as per Customer's specified Drawings and Samples.
	Threading : Various types and sizes of Threading like B.S.W., B.S.F., B.S.B., B.S.P. & B.S.P.T as per British Standard Whitworth Form and N.C. & U.N.C., N.F. & U.N.F., N.P.T & N.P.S., N.S., N.E.F. etc as per American National Form Threads are available. All threads shall be as per International GO & NO-Go Standards.
	Plating/Finish Available: Various types of Plating/Finish like Natural, Nickel, Silver, Tin or as specified are available as per specified layer of microns.
	Material : High grade free cutting brass as per IS 319 (Type 1) or BS 249 (Type 1) or any other special Brass material composition as per customer requirement.

www.deepri.com
www.brasselectricalparts.com
www.dri.co.in

brass components

Deep Recycling Industries
successfully service the diverse requirements of the copper tube, Brass Parts, and Brass tube, brass electrical parts
market which includes applications in

· Water supply Brass Inserts PPR fittings
· Drainage and sanitation
· Gas reticulation
· Refrigeration
· Heating
· Air conditioning
· Electrical components  , Control panel , earthing accessories

· General engineering

With many years experience supplying international customers

www.deepri.com

PPR Fittings ppr pipe brass insert brass Insert brass ...

We are professional brass fitting,brass pipe fitting,brass tee,elbow
fitting,brass thread fitting,fitting for pex pipe, ppr fittings,press
fitting, plumbing fitting, brass compression fitting, valve, faucet,
manufacturer and supplier in india. We can produce brass fitting
according to your requirements.More types of brass fitting, thread
fitting,plated chrome fitting wanted Brass Compression fittings for PE
pipe Straight nipple male Elbow male Elbow double, Elbow female, Tee
male, Tee, Tee female, Straight nipple male, Straight nipple female
Elbow male Compression fittings for PE pipe .

Brass Male Inserts Female Inserts PPR Fittings Brass Female Inserts
PPR Fittings Brass Male
Inserts PPR Fittings ppr pipe brass insert brass Insert brass ...

http://www.deepri.com/brass-ppr-inserts.htm

Precision Turned Components, Brass Fittings, CNC Turned Parts Manufacturers

Precision Turned Components, Brass Fittings, CNC Turned Parts Manufacturers
Manufacturers of Precision Turned Components, Brass Fittings and CNC Turned Parts
We welcome you to the world of DEEP RECYCLING INDUSTRIES. A company with a vision to 
 produce Precision Turned Components , Brass electrical, neutral links, terminal bars,
for the global market.

We at DRI in a short span have made inroads into the world market. 
 What we do best is help you. As a global leader in the manufacture and export of micro precision 
Brass Fittings and CNC Turned Parts, we work very closely with some of the leading consumers 
 and suppliers of Brass INSERTS of the world using our expertise to improve performance with innovative, 
value added products.

 

Neutral Links Bars & Terminal blocks

Neutral Links Bars & Terminal blocks are used as an accessory in Panel Boards & Electrical Board in Industries like Electrical, Electronics & Telecommunications. It is a considered as a backbone in Building Circuit Protections such as MCB, Switchgears, Circuit breaker, RCD etc. Panel Board (Distribution Board) comprising of copper bus bars, brass neutral links, and earth links to facilitate effective distribution of current. It incorporates safety devices such as MCBs, ELCBs and Isolators, which serves to protect the installation. Brass Neutral Link/Bar & Terminals are very crucial components in every application of its nature. It plays major role in Isolation of Electric equipment & clearing faulty downstream, by means of Switchgear and preventing short circuit & protecting electric circuit from damage caused by overload, in the form of Circuit breaker & so on. Because we understand this criticality, we are committed to deliver high class royal quality Brass Neutrals Links & Terminals as per International Standards & Specifications,

PCB UNIVERSAL SCREW TERMINAL BLOCKS, Pluggable Terminal Block, TB series Fixed Terminal Blocks, circle pre insulated terminal block, terminal connector, terminal block factory, BS Fused Terminal blocks - screw less wire clamp, KF15E Terminal Block

deep recycling industries

Brass Casting

Brass Casting, as the name suggests, involves the use of brass as the molten metal. Metal Casting can be carried out by the way of sand casting only. Sand casting can be defined as a 'cast part' produced by formation of a mold from a mixture of sand and pouring the casting liquid (mostly molten metal) into mold. Then the air-cooling of the mold takes place. After the solidification of metal, the removal of mold takes place. The metal used here is brass. It is a known fact that brass is an alloy of copper and zinc. Hence, to be precise, the molten metal consists of two elements.

Sand molding consists of two types- 'Green sand' molding and 'air set' molding. The first one consists of a blend of moisture, clay, silica sand and other additives. The second one makes use of dry sand bonded to all the above materials except moist clay, by the way of using an adhesive, which is fast curing.

At times, there is a placing of a temporary plug (in the mold cavity) to enable the formation of a channel to pour the fluid which is to be molded. The molds of the second type, i.e. the air-set molds result in the formation of a 2-part mold. The two parts are bottom and top. The tamping-down of the sand mixture takes place as it gets added. Many a times, the final assembly of the mold is vibrated to get the sand compacted and get the unwanted voids filled. Then the molten alloy (brass) gets poured into mold. After the solidification and cooling of brass, the separation of casting from sand mold takes place. Normally, such molds are one-time usable.

Patterns: A designer or an engineer provides the design of the object to be produced. On the basis of this design, a pattern is built by an efficient pattern maker by the use of plastic, metal, or wood. Polystyrene can also be used. The DIY Metal Casting would get contracted during solidification. Non-uniformity can also result out of this. Therefore, the size of the pattern should be a bit larger as compared to the final product. 'Contraction Allowance' is the name given to this difference. Brass enters the mold cavity through a runner system including sprue and other feeders.

--
Divyang A. Pandya